How To build a Gaming Laptop

How To build a Gaming Laptop

Laptop gaming truly is charming and magical world with far more customization, best execution, and cheaper games when compared to typical home consoles. Buying a brand new laptop that is difficult and arduous to play the latest games can be improbably expensive and off-putting to the ordinary person. Building your own gaming laptop is absolutely very simple and easy, if you are willing to get your hands a little dirty and all you’ll need is screw driver, calmness, and the ability to follow simple instructions.

For building laptop the parts of your need are computer case, motherboard, processor, RAM, power supply, hard drive, video card and optical drive (optional) and the tools are Magnetic screwdriver and anti-static wristband(recommended)
First stage: There are a few rules you want to keep in mind when selecting parts. Make sure to have a look at the socket type on your motherboard, and also whether your motherboard is Intel or AMD. These specs should mates those on the processor you’re looking for. Also keep in mind that your power supply meets the minimum wattage essential for your video card.Starting by picking your barebook and removing all its bottom panels. You should do this with too much care.

How To build a Gaming Laptop

Second stage: After removing the bottom panels, you will need to get free from the cooling system. Again, do this very carefully.

Third stage: For installing the processor you will settle the socket in your bare book. Then, carefully join the processor with it by dropping the processor on the socket. It should fit perfectly and if it doesn’t then maybe your socket is locked. For unlocking it, you only need to grab your screwdriver and then use it to twist the screw on the top of the socket, Now your processor is latched in its correct place, so lock the socket again. Conclude it by putting a very thin layer of thermal compound on the processor core.

Fourth stage:  You have to give the assigned socket for the graphics card and follow the similar steps as with the processor. Only keep in mind that you have to screw the graphics card, because there will be holes which entirely match with the motherboard.

Fifth stage: Now come back to the cooling system and re-install it by putting it on the place where it was earlier.

Sixth stage: Now it’s the turn for the RAM. There are two slots which are designed for the ram and you will see in the motherboard. You only have to put the RAM in those slots.

Seventh stage: Now you are going to install the wireless card. You’ll find a slot on the motherboard which is resembling to the one used for RAM, there is one difference that this one is very small. You’ll do the same as with the memory and you also have to screw the wireless card down. Once the wireless card is accurately placed, then you will connect two cables to the card which are gray and black particularly and can be found in the little slot.

Eighth stage: Move toward the hard drive. For installing it you will place the cradle and move it out of the barebook.Cradle is a small metal cage whose dimensions are approx. 2.5 inches x 4 inches. Now you have to screw the hard drive in it then place the hard drive in the position that used to belong to the cradle.

Ninth stage: Now everything is on its proper place. You will continue to put the panels back in their position. At the last you will connect the battery. Congratulations! You have just built your first laptop!

Building your own laptop is more affordable then buying new is not as difficult as it seems. You will feel great when you find out that you don’t only getting it for a lower price, but with a lot more power!